Welcome to visit Shandong Kaiwen metal material Co., Ltd,Sincerely serve you.

Shandong Kaiwen metal material Co., Ltd

contact number:+86 13287508267

prairie45 large diameter thick wall seamless pipeHow to carry out special inspection work

Article author:prairie issuing time:2022/07/23 09:37:22 Reading:73

Emulsified asphalt emulsion is also easy to use on the mobile slurry seal paver. It is necessary to mix on the machine and use additives for chemical control for maintenance.

4Longitudinal welded pipe has the advantages of simple production and processing technology, high production efficiency, low cost and rapid development trend. The compressive strength of spiral welded pipe is generally higher than that of straight welded pipe. Narrow blank can be used to produce welded pipe with large pipe diameter, compared with the straight seam pipe with the same length, the welding length is increased by ~ , and the production rate is low.

wprairieIn order to make the welded pipe have the required mechanical,Products Show physical and chemical properties,جرانبيdn50 المجلفن الأنابيبالميزات والمواصفات المشتركة in addition to the reasonable selection of materials and forming process, heat treatment process is often necessary. In addition, the mechanical, physical and chemical properties of aluminum, copper, magnesium, titanium and their alloys can be changed by heat treatment to obtain different service properties.

Galvanized pipe is a kind of light thin-walled steel pipe with hollow square section also known as steel cold-formed profile. It is a section steel with square section shape and size, which is made of Q hot-rolled or cold-rolled strip or coil as the base material cold bending and high-frequency welding. In addition to wall thickness thickening, the corner size and edge flatness of hot rolled extra thick wall galvanized pipe reach or even exceed the level of resistance welding cold formed galvanized pipe.

IBeoglerThe preparations for the construction of high-speed reinforcement mesh include the preparation and inspection of raw materials,Products Show the inspection and acceptance of the lower layer of the pavement, and the preparation of construction equipment and engineering machinery.

BpWhat is galvanized pipe

The surface of cold galvanized layer is smooth, dense and uniform. It has good mechanical properties and corrosion resistance. The consumption of hot-dip galvanized coating is between % - %. The galvanizing process is complex, but the thickness of single-sided coating, surface coating and double-sided coating is different, so the thin-walled pipe shall be galvanized. The zinc coating has strong protection and corrosion resistance.


prairie45



If the steel pipe is not welded well, if it is not welded, the welding conditions of steel mesh skeleton composite pipe shall be provided.

zWhat is the stainless steel passivation of alloy pipe?

UReinforcement mesh is manufactured by automatic and intelligent production line under the strict quality control of the factory. Grid size, reinforcement specification and quality are strictly controlled. The longitudinal and transverse bars of the reinforcement mesh form a network structure, so it has good bonding and anchorage with the concrete,Products Show and the load is evenly distributed, which obviously shows the seismic crack resistance of the reinforced concrete structure.

LConvenient and efficient Ditch cover plate (ditch cover plate) is widely used in municipal roads,جرانبيdn50 المجلفن الأنابيبالميزات والمواصفات المشتركة garden facilities, residential quarters, schools, stadium pipes and other places.

tK Sulfur is a harmful impurity in steel. Steel with high sulfur content is easy to embrittle during pressure processing at high temperature, which is usually called thermal embrittlement

Pickling: if the material cannot be removed after cleaning, pickling will be selected. Pickling of galvanized pipe is divided into chemical and electrolytic. How to prevent white rust of galvanized seamless steel pipe? It has a certain anti-corrosion effect on the pipeline.


prairie45



In building construction engineering, welded steel wire mesh is an essential heat preservation and crack prevention material. It has good performance and can take into account the unity between crack resistance and the requirements of face brick for base strength and the stability of heat preservation system.

agentnFrom the situation of chiseling on site, the reinforcement mesh laid by the construction party is cm below the surface layer,Reinforcement, galvanized pipe, seamless pipe, welded pipe, alloy pipe, I-beam-Shandong Kaiwen metal material Co., Ltd which greatly exceeds the specification, and then the crack resistance of the reinforcement mesh can be reduced. Because of the increasing temperature, the effect of thermal expansion and cold shrinkage and the characteristics of concrete, the cracking of surface layer is significant.

XThe pickling agent in the pickling process contains many acidic substances, including hydrochloric acid, sodium cyanide, which has strong corrosion and reduction, the corrosion resistance of alloy pipes is specified higher.

The pipeline shall be positioned according to the drawing design, and the pipeline support shall be prefabricated according to the site conditions. Hang the wire from the th floor down and fix the support.

fprairie Seismic and cracking performance the longitudinal and transverse bars of the welded reinforcement mesh form a network structure, so it has good bonding and anchorage with the concrete, and the load can be evenly distributed, which obviously shows the seismic cracking performance of the reinforced concrete structure. According to the actual test the welded reinforcement mesh laid on the road can reduce the occurrence of cracks than the manual binding mesh. It greatly reduces the unnecessary cost generated manually in the construction and shortens the construction period. The use of reinforcement mesh is simple and convenient, and the reinforcement mesh is convenient for transportation.

wRNext, let&#;s introduce the operation steps of roll adjustment during roll change. First of all, we must replace the specification and model of the welded pipe manufacturer. Generally, replace the complete set of rolls. The adjustment process of the rolls is as follows: first, draw an axis from the channel of the generator set to the import and export with stainless steel wire for adjustment, so that the holes of each frame plate are on the same axis, and the bottom line of forming ethics meets the technical standards.

In addition, galvanized steel is more expensive than ordinary steel pipes, so installing them requires a lot of financial costs.

TAGSlabel:Products Show

Copyright Notice:Shandong Kaiwen metal material Co., LtdProvidedprairie45 large diameter thick wall seamless pipeHow to carry out special inspection workIt comes from the Internet and is only used for display purposes, and does not guarantee the accuracy, validity, timeliness or completeness of such information. The copyright of some pictures and text still belongs to the original author. If you infringe on your rights, please contact us and we will delete it within 24 hours as soon as possible. We only provide free services, relatedprairie45 large diameter thick wall seamless pipeHow to carry out special inspection workIt also does not indicate the views or opinions of this website, and has no reference value. Thank you.

    •   +86
    •   +1
    •   +355
    •   +213
    •   +93
    •   +54
    •   +971
    •   +297
    •   +968
    •   +994
    •   +247
    •   +20
    •   +251
    •   +353
    •   +372
    •   +376
    •   +244
    •   +1
    •   +1
    •   +43
    •   +61
    •   +853
    •   +1
    •   +675
    •   +1
    •   +92
    •   +595
    •   +970
    •   +973
    •   +507
    •   +55
    •   +375
    •   +1
    •   +359
    •   +1
    •   +389
    •   +229
    •   +32
    •   +354
    •   +1
    •   +48
    •   +387
    •   +591
    •   +501
    •   +267
    •   +975
    •   +226
    •   +257
    •   +850
    •   +240
    •   +45
    •   +49
    •   +670
    •   +228
    •   +1
    •   +1
    •   +7
    •   +593
    •   +291
    •   +33
    •   +298
    •   +689
    •   +594
    •   +590
    •   +39
    •   +63
    •   +679
    •   +358
    •   +238
    •   +500
    •   +220
    •   +242
    •   +243
    •   +57
    •   +506
    •   +1
    •   +299
    •   +995
    •   +53
    •   +590
    •   +1
    •   +592
    •   +7
    •   +509
    •   +82
    •   +31
    •   +599
    •   +1
    •   +382
    •   +504
    •   +686
    •   +253
    •   +996
    •   +224
    •   +245
    •   +1
    •   +233
    •   +241
    •   +855
    •   +420
    •   +263
    •   +237
    •   +974
    •   +1
    •   +269
    •   +383
    •   +225
    •   +965
    •   +385
    •   +254
    •   +682
    •   +599
    •   +371
    •   +266
    •   +856
    •   +961
    •   +370
    •   +231
    •   +218
    •   +423
    •   +262
    •   +352
    •   +250
    •   +40
    •   +261
    •   +960
    •   +356
    •   +265
    •   +60
    •   +223
    •   +692
    •   +596
    •   +230
    •   +222
    •   +1
    •   +1
    •   +976
    •   +1
    •   +880
    •   +51
    •   +691
    •   +95
    •   +373
    •   +212
    •   +377
    •   +258
    •   +52
    •   +264
    •   +27
    •   +211
    •   +674
    •   +505
    •   +977
    •   +227
    •   +234
    •   +683
    •   +47
    •   +672
    •   +680
    •   +351
    •   +81
    •   +46
    •   +41
    •   +503
    •   +685
    •   +381
    •   +232
    •   +221
    •   +357
    •   +248
    •   +966
    •   +590
    •   +239
    •   +290
    •   +1
    •   +1
    •   +378
    •   +508
    •   +1
    •   +94
    •   +421
    •   +386
    •   +268
    •   +249
    •   +597
    •   +677
    •   +252
    •   +992
    •   +886
    •   +66
    •   +255
    •   +676
    •   +1
    •   +1
    •   +216
    •   +688
    •   +90
    •   +993
    •   +690
    •   +681
    •   +678
    •   +502
    •   +58
    •   +673
    •   +256
    •   +380
    •   +598
    •   +998
    •   +34
    •   +30
    •   +852
    •   +65
    •   +687
    •   +64
    •   +36
    •   +963
    •   +1
    •   +374
    •   +967
    •   +964
    •   +98
    •   +972
    •   +39
    •   +91
    •   +62
    •   +44
    •   +1
    •   +246
    •   +962
    •   +84
    •   +260
    •   +235
    •   +350
    •   +56
    •   +236